|
|
PRODUCTS
What are Linear Thrusters?
Linear Thrusters are precise but simple linear actuators which utilize
high pressure air (up to 250 psi) or low pressure hydraulic fluid (up to
500 psi) for their motive power. The larger models (4 through 54) are
offered with hydraulic cylinders which operate at up to 3000 psi. All
air cylinders are prelubricated at the factory but should be used with
filtered, lubricated air for best results. Otherwise, introduce a few
drops of 10 weight oil into each cylinder port every 100 hours of
operation. Hydraulic cylinders should be used only with clean hydraulic
fluid compatible with Buna N seals.
Spring-loaded oiler ports are located on the faces or sides of each
Linear Thruster housing. Introduce several drops of 10 weight oil into
each port every 100 hours of normal operation, more often if rapid
cycling is necessary. Standard oilers can be replaced with Alemite
1641-B fittings and light weight grease used as a lubricant. This is
recommended only in those cases where rapid movements and high cyclic
rates will not occur.
Take a look at our product lines:
Two Shaft Linear
Thrusters
Four Shaft Linear
Thrusters
Moveable Housing
Linear Thrusters
Specials
|
Home |
About
Us |
Products |
Catalog |
Software |
Contact Us
|
|
